Simple & quick hair removal

Our recommendation - Video & FAQ's for your perfect result!

For a successful application, we strongly recommend that you follow the instructions and individual steps in the video. To avoid potential mistakes and ensure your application runs smoothly, feel free to check out our FAQ section below as well. For first-time users, we recommend following the video instructions.

Step 1: Prepare Wax

Fill the Wax Pearls (200g) into the heater.

Step 2: Prepare Heater

Plug the heater into the power and turn the control to the highest setting. Once the wax is completely melted and has a smooth, creamy consistency (about 30 minutes, depending on how much wax is in the heater). Then turn the heater back to medium and wait about 5-10 minutes for the wax to reach the perfect temperature.

Step 3: Apply wax

Once the wax has reached the perfect temperature, the skin area to be depilated should first be cleaned. Now you can apply the wax with a wooden spatula in the direction of hair growth. The wax should be applied about 0.2 mm thick.The end of the applied wax should be applied a little thicker, because you can grip it better.

Step 4: Remove wax

Wait briefly until the wax feels dry (about 30-60 seconds). Once the wax is dry, grab the thicker end of the wax and pull it off in a quick motion against the direction of hair growth - keeping the skin taut. Repeat these steps on all desired areas. You can remove any wax residue with the wax you have already used.

Step 1: Prepare Wax

Fill the Wax Pearls (200g) into the heater.

Step 2: Prepare Heater

Plug the heater into the power and turn the control to the highest setting. Once the wax is completely melted and has a smooth, creamy consistency (about 30 minutes, depending on how much wax is in the heater). Then turn the heater back to medium and wait about 5-10 minutes for the wax to reach the perfect temperature.

Step 3: Apply wax

Once the wax has reached the perfect temperature, the skin area to be depilated should first be cleaned. Now you can apply the wax with a wooden spatula in the direction of hair growth. The wax should be applied about 0.2 mm thick.The end of the applied wax should be applied a little thicker, because you can grip it better.

Step 4: Remove wax

Wait briefly until the wax feels dry (about 30-60 seconds). Once the wax is dry, grab the thicker end of the wax and pull it off in a quick motion against the direction of hair growth - keeping the skin taut. Repeat these steps on all desired areas. You can remove any wax residue with the wax you have already used.

Wax Kit Heater

€25,50

€39,23

Kit:

with Heater

Variant

Product information

FAQs

General

What do I do if areas of skin are injured?

Do not apply wax to broken or irritated skin. This can make the irritation worse.

Can I go directly to the solarium and into the sun after the application?

It's best to avoid direct sunlight for 24 hours after waxing.

How long does my hair have to be for the application?

We recommend using it for hair lengths of 5 mm or more.

What do I have to consider before using waxing?

Clean your skin thoroughly so that there are no oils or creams on your skin so that the wax can grip the hair well. The application should not be carried out if you have recently used self-tanner, otherwise streaks may appear.

How do I optimally care for my skin after waxing?

You can easily remove wax residue with our Wax Oil. It also nourishes and soothes your skin. We can also recommend using other nourishing lotions.